Radon 202: Inspecting Mitigation Systems
I. General Overview
5 Topics
Definition of Mitigation System
Goals of Radon Mitigation Systems
Additional Benefits of Mitigation Systems
Mitigation System Compliance
Post Mitigation Testing Requirements
II. Active Mitigation Systems
10 Topics
Types of Active Mitigation Systems
Sub-Membrane Depressurization (SMD)
Understanding Systems With Multiple Suction Points
Vent Pipe Requirements
Variances
Entry Routes and Sealing Requirement for Active Systems
Fan Location Criteria
Exterior Fan Installation
Electrical Requirements
Required Labeling of Active System Pipes
III. Passive System Installation
9 Topics
The Radon Resistant Construction Act
Passive Pipe Installation
Vents In Crawlspaces
Soil Gas Retarders
Proactive New Construction Design Requirements
Required Labeling of Passive Pipes
Combination Foundations
Joints in Air Ducts and Plenums
Activation of Passive Systems
Radon 202: Inspecting Mitigation Systems Final Exam
Previous Topic
Next Topic
Required Labeling of Passive Pipes
Radon 202: Inspecting Mitigation Systems
III. Passive System Installation
Required Labeling of Passive Pipes
Section Progress
0% Complete
All exposed and visible interior radon vent pipes must be conspicuously identified with at least one label on each floor and in accessible attics.
The label must read “Radon Reduction System”.
Previous Topic
Back to Section
Next Topic
Contact Us
Hours
chat/iMessage
(309) 270-6089
Support
Our Location
Toggle the Widgetbar
Questions? Feedback?
powered by
Olark live chat software
Login
Accessing this course requires a login. Please enter your credentials below!
Username or Email Address
Password
Remember Me
Lost Your Password?